Hey all, just got a Geforce 5070 to replace my 2070 from years ago. Ubuntu’s been pretty smooth sailing for me until now, and I’m not exactly the best at navigating this stuff.
When Ubuntu starts to boot, the GPU stops outputting display to my monitor. As though it doesn’t detect the new GPU. I tried putting the 2070 back in and downloading the 570 drivers but it didn’t change anything. I found a tutorial for what seemed to be my issue that asked me to change the kernel, but halfway through the tutorial, commands that worked on their machine started failing on mine. I wish I’d documented what the error messages were because when I went to poke around more today, I got a message about kernel panic and can’t even boot with the 2070. Where do I go from here?
SOLUTION: Went back and got an AMD GPU. Worked out of the box. Thanks to all who helped. Would have kept trying but I only have so much time for troubleshooting right now.
I hate to be the jerk but it’s because you got Nvidia. Intel and AMD cards enjoy significantly better graphics card support.
I would also try a different distribution that’s known for having more recent kernels and faster development. Something like Manjaro is actually a pretty good fit for this situation.
I hate to be the jerk but it’s because you got Nvidia
No its not. The nvidia 5070 works on linux and has for a while now.
I would also try a different distribution that’s known for having more recent kernels and faster development. Something like Manjaro is actually a pretty good fit for this situation.
We really need to avoid just suggesting a different distro as the solution. In this case it makes no sense, they’re running kernel 6.14 and the Nvidia driver is out of kernel. Phoronix benchmarked the 5070 running an older version of ubuntu and still got good performance and it worked well. That means their version of ubuntu which is new enough to support it. Im not sure what the issue is but I think switching distro’s is a last resort once you’ve tried everything else.
“it works on Linux” isn’t black and white. My 2070 would not work with freerdp in full screen and nouveau drivers. It works with Nvidia drivers, though.
Great but it’s not working out of the box and clearly that was the expectation.
AMD has built in support so no extra steps needed.
Ubuntu has a history of not having the latest kernels and having spotty support for new hardware.
Sure you can fix it but again the out of the box expectation.
We can agree that it should work and can work and I don’t disagree that always suggestions a different distribution is not generally helpful but watching people suffer trying to get Ubuntu working is a sore spot for me.
Its not an out of the box installation. He has an existing ubuntu installation and is upgrading the GPU. We can always be like oh you ran into a single issue, just get rid of your hardware and swap to an entirely new distro. Thats a worst case solution to the problem.
AMD has built in support so no extra steps needed.
Doesnt matter, he isnt asking about an AMD card.
Ubuntu has a history of not having the latest kernels and having spotty support for new hardware.
Its actually the opposite, ubuntu generally has very good hardware support. Cannonical work with vendors to test hardware works on their platform. The 5070 phronix benchmarks were done on ubuntu. Suggesting its a distro issue is ignoring the problem
Nvidia
fool me once shame on you, fool me twice shame on me
If you have at least Ubuntu 24.10 and the NVIDIA 570.133.07 driver installed with the 2070, it should be plug and play with the new card.
If you put the 2070 in are you able to get a working system?
I think I’m on 24.04.3 LTS. May I ask what is in 24.10 that would make a difference?
24.10 is a minimum. If you’re on 24.04 that means you are very up to date and have the 6.14 kernel which is new enough. So we can rule that out as an issue.
I was able to boot on the 2070. I’ll try on a newer version of Ubuntu.
Can you run nvidia-smi and confirm you’re on the 570 driver?
Also after you do a failed boot with the 5070 put the 2070 back in and try run this command
journalctl -b -1 -p 0..2to check the log from the previous boot and filter for only high priority issues. This should give some insight on whats failing when you try and boot with the 5070.Another dumb check but have you got the display cables plugged into the gpu?
Nvidia-smi output:
Mon Aug 11 19:17:03 2025
±----------------------------------------------------------------------------------------+ | NVIDIA-SMI 570.158.01 Driver Version: 570.158.01 CUDA Version: 12.8 | |-----------------------------------------±-----------------------±---------------------+ | GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |=========================================+========================+======================| | 0 NVIDIA GeForce RTX 2070 … Off | 00000000:09:00.0 On | N/A | | 0% 37C P8 18W / 235W | 481MiB / 8192MiB | 2% Default | | | | N/A | ±----------------------------------------±-----------------------±---------------------+±----------------------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=========================================================================================| | 0 N/A N/A 2099 G /usr/lib/xorg/Xorg 143MiB | | 0 N/A N/A 2358 G /usr/bin/gnome-shell 105MiB | | 0 N/A N/A 2950 G …exec/xdg-desktop-portal-gnome 10MiB | | 0 N/A N/A 5684 G …/6565/usr/lib/firefox/firefox 167MiB | | 0 N/A N/A 8244 G /usr/bin/nautilus 13MiB | | 0 N/A N/A 8333 G …tcher-linux-x64/balena-etcher 20MiB | ±----------------------------------------------------------------------------------------+
Can you run Journalctl and take a look at the logs from one of the boots with the 5070? You can use journalctl -b -0 for current boot -1 for the previous boot -2 for two boots ago etc. -p 0…2 to limit the output to events from critical to severe priority.
One thing that comes to mind is that the 50series is only supperted by the open version of the proprietary Nvidia drivers. The closed version doesn’t support your new GPU, but would work with your old GPU. Do you know which version you installed?
deleted by creator
My 2080 has issues and cuts off part of the screen on Linux mint. My 6700xt and amd setup would never. I switched and tried every driver. I’ve never used nvidia. Anyone have advice?
.
I tried all drivers and done all display settings. I’ve changed resolution and refresh. I can’t for the life of ms figure this out. Anyone at all please help… Its so frustrating I don’t even use my PC anymore.
deleted by creator
I didn’t so a reinstall I simply swapped my ssd into another PC. When I sold my amd rig. System logs show no errors that im aware of when in the GUI system reports in mint. It’s works fine on windows but on mint it cuts off about 5 percent of the screen or 10 all the way around. So I’m missing the start icon and such. I have never deletes nvidia files or configs. I’m used to amd and never used nvidia before. I did however try every driver from noveau to 575 open. All of them made no difference or made it worse.
.
You did plug in the GPU power cables as described in the manual, right?
Yeah lol the GPU is observably receiving power. Lights and fan come on as everything starts up and they stay on. The green safety light is on. I don’t think it’s a power issue.
Most GPUs will have fan spin & lights if only on pcie power (the pcie slot provides 75W without external connection), but then misbehave during display; I know it sounds stupid but make sure the 12V power connector on the top of the card is firmly plugged in, that connector in particular has a reputation for being unreliable.
