Good on ya, that’s an awful lot of work. I did something similar years ago with 2,000 emails and it took forever.

The thing to do now is stay on top of the emails coming in and unsubscribe or block any that remain. If you can stem the flow you won’t need to purge again.

I did a similar project with a raspberry pi pico w and a glitter lamp. I ended up destroying the surface mount LEDs trying to solder them in to the board and instead replaced them with my own. The stirring motor was good, and a button to control it from the outside was a nice addition. Put the whole thing together with ESP Home and it’s fantastic. Also allowed me to switch from disposable batteries to a standard USB cable for power.

When testing Kingdom Come: Deliverance 2, Cyber noticed a shockingly significant jump in FPS, with Linux generating ~32% more FPS compared to Windows. This trend follows at lower wattages, albeit with less noticeable differences, and the delta actually plateaus in Hogwarts Legacy to the point that both Bazzite and the Xbox FSE offer the same FPS at 13W. That being said, those frame rates are much more consistent on Linux, according to Cyber, who shows that the FPS graph on Windows fluctuates regularly, while staying mostly flat on Bazzite.

Just going to second this because I had to complain about the process being a pain here on Lemmy, which earned a lot of upvotes, before someone asked how I used the software center and I said the same as the Microsoft Store which was to say not at all. The number of downvotes told me I was way off and I needed to give it a fresh look.

Removes from cart

Good tip!

Where I am from local governments have disposal policies for surplus items. This can be seized property, vehicles, office supplies, and computers. Or may be worth researching how your local area handles disposal because I’ve seen pallets of computers go cheap.

Pieus

I run AdGuard as an addon to Home Assistant. If you want to stick to AdGuard you can go to Settings > Client Settings and set a per-client filtering rule. There is a tab in the client settings that can be used to filter specific services with a click. Setting an IP reservation for your child’s device in the DHCP settings of Unifi or your router will help ensure the IP address stays consistent.

For the PiHole option, you don’t actually have to let the PiHole handle DHCP. You just need to tell your DHCP server what DNS server to use. For example, my router is .1 and my Raspberry PI is .2. The DHCP server, my router, tells all devices .1 is the gateway and .2 is the DNS server. You may also need to set these settings on the individual devices to prevent them from ignoring your DNS settings, but that can be done from the network settings. Avast had some safe networking “feature” that would force my DNS settings to be ignored, same with my Android phone.

Of course, the downside to all of this is that any different device, different IP, device from a friend, or mobile data could bypass these restrictions. You may soon be in an arms race with your child and chances are they can get more clever that you can in a shorter time frame.

MotionEye may be worth looking into further. There is an add-on for it. I have used to before on a raspberry Pi to steam video of the washer in the basement so that I could know if it was done from the second floor.

I love the idea and it’s something I thought about doing too, so I’m super interested in this thread.

For me, I thought it would be interesting to remove the existing stereo and mount everything it the double-DIN hole left behind. That would give you access to power, ignition, and speaker wires easily. You would need to do some rewiring between cars, but it would be the most practical spot.

From working on some fleet vehicles before, I’ve seen interesting systems where all of the accessories were on their own battery that only charged when the car was running or off an external charging cord that could be connected if it was going to sit for a while.

The benefit of a separate power system was that the equipment didn’t need to boot up every time you started the car. Maybe the display and anything else could be powered only when running, but if the main computer was always powered that would save time. It could also get a signal from a battery maintainer that the accessory battery is low and perform a graceful shutdown.

B&H is one of my favorite vendors, but god damn do they go overboard with the air cushions in their packages.

I agree, Linux Mint has been well done.