Clippy@piefed.social to Tabletop Miniatures@lemmy.worldEnglish · 10 days agoFDM printed minimedia.piefed.socialimagemessage-square4linkfedilinkarrow-up141arrow-down10file-text
arrow-up141arrow-down1imageFDM printed minimedia.piefed.socialClippy@piefed.social to Tabletop Miniatures@lemmy.worldEnglish · 10 days agomessage-square4linkfedilinkfile-text
minus-squareBustedknuckles@lemmy.worldlinkfedilinkEnglisharrow-up5·10 days agoNice result, what scale and nozzle diameter? Resin printing is too messy/gross for me and my fdm print attempts always seem too coarse
minus-squareExcessShiv@lemmy.dbzer0.comlinkfedilinkEnglisharrow-up7·10 days agoI’ve had decent success with 28-32mm scale minis with a 0.2mm nozzle. It still doesn’t look good, but it’s OK at a distance and good enough for my kids.
minus-squareClippy@piefed.socialOPlinkfedilinkEnglisharrow-up6·edit-210 days agoThanks, I used a 0.2mm nozzle I don’t remember all of the settings but I followed this post (reddit link): https://www.reddit.com/r/FDMminiatures/comments/1i8gy70/fdm_miniatures_how_i_support_them_and_some_updates/ Screenshot of settings: https://postimg.cc/gallery/QBJb2RJ
Nice result, what scale and nozzle diameter? Resin printing is too messy/gross for me and my fdm print attempts always seem too coarse
I’ve had decent success with 28-32mm scale minis with a 0.2mm nozzle. It still doesn’t look good, but it’s OK at a distance and good enough for my kids.
Thanks, I used a 0.2mm nozzle
I don’t remember all of the settings but I followed this post (reddit link): https://www.reddit.com/r/FDMminiatures/comments/1i8gy70/fdm_miniatures_how_i_support_them_and_some_updates/
Screenshot of settings: https://postimg.cc/gallery/QBJb2RJ